Musicians Collaboration Studio
How To => Production Tips and Tricks! => Topic started by: nitch on October 19, 2008, 07:21:36 AM
-
I am looking for some tips and tricks that I could apply when recording Acoustic Guitar. I am on the hunt for a nice full rich sound. I am using an AKG Perception 100 condenser microphone. I believe that someone with the skill can achieve this while eqing and editing the actual track but I'd rather lay it down the way I want it so that I don't have to re visit.
Any help would be greatly appreciated.
-
i don't think you'll achieve always the same recording sound . Each session e one and unique, mebbe you'll have to start dealing with eq's and tuff like that. Also each song is different and you'll need to make the guitar sound acording to the song.
-
thanks for the advice...
-
Just a general guide....
Clean / replace the strings first..can make a huge difference
Try different pick they can make it sound different too
Where you record will also have an effect ..try not to choose somewhere too dead...
Start with the mic pointing toward the spot where the neck meets the beody and see how that sounds...start maybe 6inches back and experiment.
Another popular method is have the mic coming over shoulder so it picks up a simlilar sound to what you hear when playing
If you want a big sound, try playing it twice and panning it either side in the mix...unless you have two mics which is a whole other situation.
CD
-
To CD's point, I have a rather dead room, and I have cut three pieces of plywood about 1 meter square and I position these under the guitar and usually one behind and angled up to create some reflections. This helps give the recording some depth and color. CD didn't mention the obvious, but getting the guitar in tune is something to pay attention to also - and I echo what he said about new strings -- that can help with tone as well as intonation.
-
I have one exampled of how I recorded my acoustic at this link:
http://www.musicianscollaboration.com/forum/index.php?topic=4280.0
Paul